JANSEN FLAIL VERGE MOWER 2.4MTR

The especially robust construction of the AGF-240 verge mulching mower makes it stand out. In contrast to the lighter models "AGL" this is the heaviest mowing unit model (higher material strength etc.) we are dealing with. Heavier 1.2 kg hammers are also installed in this mowing unit, not the otherwise standard 800 g hammers. The Jansen AGF-240 has a specially strengthened angular gearbox. Through lateral alignment of the mowing unit you can mow ditches, bank areas, earth walls, etc., with ease. This model has a mowing width of 239 cm and is driven using a P.T.O, included as part of the delivery. It can be moved to the left and right and you can set it at an angle (90° upward and 55° downward). For this function you need 2 hydraulic control circuits on your tractor, as the mower unit has 2 double-action hydraulic cylinders for this purpose. The 24 specially hardened, 1.2 kg hammer blades, which are arranged on a double spiral drive shaft, shred clippings to a minimum size. Even very high grass, bushy or straw-like clippings are no problem for this mower! Due to the open rear bonnet maintenance work or changing hammer blades will be facilitated. Please be informed that the bonnet has to be closed while operating. With maximum lateral alignment the dimension from the middle of the tractor to the outer edge of the mowing unit is approx. 329 cm. Please find more dimensions in the following drawings: Furthermore, the Jansen AGF-240 comes with collision protection. This is triggered in the event of contact with hindrances, for example fencepost etc., and allows the verge mulching mower unit to swing upward, site and backward in order to minimise the risk of greater damage. The cutting height can be set with the top controller and the runners mounted on the side. The AGF-240 mulching mower additionally has a trailing roller and a freewheel gearbox. The suspended chains at the front of the mower unit prevent stones escaping. The mower unit is hung using the three point linkage of your tractor (from Cat. II). Your tractor should have at least 90 HP. We have many competitors who try to attract you with especially low prices. Make sure you get a personal impression of the company and the products before you buy. It is best if you can do this in person, or at a minimum on the phone. Time and time again we see offers which display photos from the Far East. This could mean, that the product is not even in Europe. We also often hear from customers that visits and collections are not possible, that payment on delivery is not accepted and even that a deposit must be paid before the product is available. Compare our machines with competing products! You won’t find anything comparable. We didn’t only develop these devices ourselves, but also offer excellent service (master technicians workshop) and spare parts. We have almost every part in stock. In the event of questions or problems we are only a phone call away. With us you speak with knowledgeable staff and not with “call-centre agents”! We have all of our products assembled and ready for operation in our exhibition halls. We would love for you to come by to test them! Technical specifications: Mowing width: 2390 mm Weight: ca. 1.000 kg Weight including packing: 1.030 kg Tilt movement range: +90° to -55° Cutting blade type: 1.2 kg hammer blades P.T.O: Included in delivery Rpm: 540 drive shaft ø: 160 mm trailing roller ø: 160 mm Packaging measurements: 3080x1080x920 mm (LxWxH) Wall thickness: 6 - 16 mm (depending on location on the mower) Drive: 5 Piece drive belt Mounting: Three point hitch from Cat. II Tractor: min. 90 HP 2.2MTR SHOWN IN ATTACHED VIDEO €5500 PLUS VAT QUADFACTORS NOBBER MEATH A82P8X5 046-9010222 DEREK 0872966617