McKee Trailers- 27-T Low Loader EU Spec

- Heavy duty construction consisting of 10x6 I beam chassis and 8x3 channel side chimes turned out with plenty of tying bars rope hooks and d shackles. - Wide ramps are 900mm wide and is made from 100x50x5mm high tensile box. They are hydraulically powered with valve bank at left rear for operating and plated with 5mm chequered plate Control bank to be placed on the LHS. - Extra-long ramps to be made 2.5 meters long. - Sprung draw bar. - Adjustable toe eye Belgium standard. - 5mm plating on headboard - Trailer bed length is 28ft bed with a 4ft beaver tail. - Overall width of trailer will be 2500mm. - Trailer will be rated at a 27T ton gross which will be able to carry 22T pay load. - 420x180 10 Stud commercial Axles. - Auto slack adjusters fitted to axles. - HS 100 Single leaf parabolic suspension complete with stepped rear chassis. - WABCO Dual Lock Air Brake System with 60L Tank complete with load sensing valve. - Trailer to be fitted with 18mm air feed pipe – RE Valve and 16mm brake lines. - 1 x test valve to be fitted to Air brake pots on each axle. - Load sensing valve to be fitted in between both axles. - EU couplings fitted to end of Susie lines. - New double J rated road tyres 445x45x19.5. - Pressure treated timber. - Shot blasted and painted in choice of colour. Case Red - LED front side and taillights. - Trailer side lights to be fitted not exceeding 1m from rear. - White reflective tape on sides and red tape rear. - Rear width marker lights fitted front and rear. - 2x No. plate Lights. To be 50mm wider than No. plate - 2 x Red reflective triangles to be fitted on rear channel between ramps. - 40Km Speed Warning Disc to be fitted to rear right Ramp. - 1 x Strobe lights on ramps - Triple hamburger lights - Metal 7 Pin Plug to be fitted - 2x Rear work lamps fitted to the ramps. - 2 x Extra Lights on rear axle - Rear Steering axle. - Centre of trailer floor plated with 8mm plate. - 8 x Pairs of D Sh Dealer Inquiries Welcome Joe 07871640548