RF-12.64 ReFerence

» 12" cone speaker » 1.5" compression driver with constant directivity horn » 600 W power handling R Based on a 2 hour test using a 6 dB crest factor pink noise signal bandlimited according to IEC 268-1 (1985). All power ratings are referred to the nominal impedance. P Conventionally 3 dB higher than the RMS measure, although this already utilizes a program signal. K Corresponds to the signal crests for the test described inR. The D.A.S. RF-12.64 is a 2-way vented loudspeaker system designed for applications covering speech reinforcement, program reproduction and live music productions. FEATURES Introduction The low end utilizes a high efficiency 12" low frequency speaker with 4" voice coil. The high end makes use of a 1.5" exit compression driver with 3" titanium diaphragm, coupled to a rotatable 60º x 40º horn. The enclosure is manufactured from Wisa® Birch plywood and is finished with a durable black paint. The trapezoidal enclosure has 10 degree side angles for easier arraying. The unit has a robust grille design internally lined with acoustically transparent filter cloth to protect the loudspeaker components. The covering is resistant to wear and tear, provides protection from dust and dirt. 12 integrated rigging points that accept 10M forged steel eyebolts make suspension in either the horizontal or vertical positions safe and simple. The D.A.S. RF-12.64 is stand and pole mountable, and 2 or 3 units can be arrayed using AXA accessories. Description 600 W 1200 W 2400 W 50 Hz - 20 kHz 8 Ω 6.9 Ω (at 20 kHz) 97 dB SPL 131 dB 60º Horizontal x 40º Vertical Wisa® Birch Plywood Black Paint LF: 12 H/GM 12G HF: M-10N/GM M-10 2 paralleled NL4 Speakon, wired to ±1 64.4 x 37 x 34.6 cm 25.4 x 14.6 x 13.6 in 25 kg (55 lb) ANL-2; AXU-RF12; AX-Truss; AXA- 2RF12; AXA-3RF12; TRD-2; TRD-4